cubietruck突然坏了
我的cubietruck板突然不能启动了，接电后电源插头附近的红灯亮了一秒钟就变暗了，LED2闪了一下就灭了。按FEL接USB线连电脑也没有反应，无法刷机。发邮件给fix@cubietech.com也没回应1.如果插入存储卡，串口打印
U-Boot SPL 2017.05 (Jun 24 2017 - 15:49:02)
然后就停了。
2. 不插存储卡，串口打印
HELLO! BOOT0 is starting!
boot0 version : 2.0.0▒
read dram para.
dram driver version: 1.15
或者
HELLO! BOOT0 is starting!
boot0 version : 2.0.0▒
read dram para.
dram driver version: 1.15
dram size =2048MB
0xffffffff
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.151] boot1 version : 2.0.0
[ 0.151] script installed early ok
[ 0.152] pmu type = 3
[ 0.256] bat vol = 1303 mv
[ 0.270] axi:ahb:apb=4:2:2
[ 0.270] set dcdc2=1450mv, clock=912M successed
[ 0.272] key
[ 0.285] no key found
[ 0.285] flash init start
[ 0.285] NB1 : enter NFB_Init
[ 0.288] NB1 : enter phy init
[ 0.291] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
[ 0.299] get the good blk ratio from hwscan : 912
[ 0.304] NB1 : nand phy init ok
[ 0.353] nand part 0 sec count is not align
[ 0.353] nand part 4 start sec is not align
[ 0.357] nand part 0 sec count is not align
[ 0.361] nand part 4 start sec is not align
[ 0.366] nand part 1819 sec count is not align
[ 0.370] NB1 : init ok
[ 0.373] flash init finish
[ 0.378] fs init ok
就不动了。
看样子要返厂维修，请联系fix@cubietech.com
或者联系support@cubietech.com
好的。谢谢
页:
[1]