a20-cubieboard lubuntu固件发布20130830
A new a20-cubieboard lubuntu server/desktop firmwares is available now.Download URL:
http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/
cb-a20-lubuntu-12.10-v1.05-kernelsource.tar.gz
cb-a20-lubuntu-12.10-v1.05.img.gz
cb-a20-lubuntu-server-13.06-v1.00.img.gz
changes:
1. sata, microSD, wifi(8188eu, 8192cu), usb, gpio, pwm, HDMI, ir, audio, ethernet have been tested
2. desktop: enable mali/x11 support
3. fix poweroff issue
4. upgrade to newest linux-sunxi 3.4 kernel, with some minor changes for cubieboard
5. server: preinstall openssh-server, vim,
issues:
1. video encoding/decoding, spi, 2D acceleration is not ready
also, I've successfully used gpio interrrupt, and usb otg(host/device), but without carefully test. so use it as your own risk.
Very good!
Cubieboard2 萬歲! 请注明img是SD卡的或NAND? 本帖最后由 asdf 于 2013-9-5 19:42 编辑
@matson
首先要顶一下cubieboard。
一直用ubuntu,有个疑问:
之前A20刷ubuntu 12.04 v1.04 想增加一个串口。
通过搜索论坛里的教程得知一个途径:修改script.bin
挂载/dev/nanda 然后用工具修改里边的script.bin 但是无作用。后来甚至尝试直接将script.bin直接删除。系统仍然能正常启动!无任何报错。没读这个文件吧?(是uboot读这个吧?)
搜了一下论坛有人和我的情况一模一样(我后来又刷v1.03也是一样的):
http://cn.cubieboard.org/forum.p ... d=782&highlight=fex
因为玩板肯定要增加uart、spi等接口的来连接其它外设。请教下该怎么做呢?望回复。多谢! asdf 发表于 2013-9-2 10:33 static/image/common/back.gif
@matson
首先要顶一下cubieboard。
如果没有script.bin文件应该是无法启动的。所以你要再确认下这个问题 @matson
请问cb-a20-lubuntu-server-13.06-v1.00.img用的是什么桌面?
我在VNC启动脚本中进行修改startlubuntu &后,屏幕还是灰色的一片。 Server怎么会装桌面呢? gpio如何使用呢,好像没有驱动啊? fleamboy 发表于 2013-9-3 00:32 static/image/common/back.gif
gpio如何使用呢,好像没有驱动啊?
应该是modprobe gpio_sunxi即可 matson 发表于 2013-9-3 13:01 static/image/common/back.gif
应该是modprobe gpio_sunxi即可
谢谢,已经找到了!