如何编译更高的内核，对内核需要做什么修改？

aurora

我下载了linux-3.18.1，GIT上A80的内核版本好像是3.4.39，对下载的linux-3.18.1要做什么调整才能刷入EMMC
我按照教程做得，只不过直接把linux-3.18.1目录修改成了linux-3.4
然后
source tools/scripts/envsetup.sh
选择的是Debian
cb_build_card_image执行成功
cb_install_flash_card sdb pack也成功

然后将SD卡插如板子启动，出现如下信息

1. --------fastboot partitions--------
   
2. mbr not exist
   
3. base bootcmd=run setargs_cubie boot_normal
   
4. bootcmd set setargs_mmc
   
5. key 0
   
6. cant find rcvy value
   
7. cant find fstbt value
   
8. no misc partition is found
   
9. misc_message->command = 0
   
10. to be run cmd=run setargs_cubie boot_normal
    
11. WORK_MODE_BOOT
    
12. board_status_probe
    
13. sunxi_bmp_logo_display
    
14. sunxi flash error: cant get part 0 offset
    
15. ** Can't read from device 0 **
    
16. 
    
17. ** Unable to use sunxi_flash 0:1 for fatload **
    
18. sunxi bmp info error : unable to open logo file bootlogo.bmp
    
19. [      2.079]Hit any key to stop autoboot:  0
    
20. 
    
21. ** Unable to read "uimage" from mmc 0:1 **
    
22. Wrong Image Format for bootm command
    
23. ERROR: can't get kernel image!
    
24. sunxi#
    

复制代码

我该如何调整才能刷入更高版本的内核?

fbia

你的内核可能不行应为没有全智官方的源代码在里面哦