在TF卡上刷了arch linux,发现网卡没驱动

wilsonwan · 发表于 2015-1-18 23:57:39

刷完之后无法加载网卡,本想archlinux会轻量一些,用什么装什么,可惜,网卡驱动不了...

SKY000 · 发表于 2015-1-19 10:02:48

请问你的 arch-linux 卡固件哪里找的？？官方好像没有发布喔（还是我没找到）

raquid · 发表于 2015-1-19 15:39:04

CB还是CT？什么网卡？

raquid · 发表于 2015-1-19 15:42:43

SKY000 发表于 2015-1-19 10:02
请问你的 arch-linux 卡固件哪里找的？？官方好像没有发布喔（还是我没找到） ...

http://archlinuxarm.org/platforms/armv7/allwinner/cubieboard-2

wilsonwan · 发表于 2015-1-19 21:17:17

CT ,eth0和wlan0都无法驱动

sunbeyond · 发表于 2015-1-20 09:37:28

wilsonwan 发表于 2015-1-19 21:17
CT ,eth0和wlan0都无法驱动

你能具体点？？具体报什么错什么现象

wilsonwan · 发表于 2015-1-21 20:58:20

应该是没驱动,我后来换debian了

gcd0318 · 发表于 2015-2-4 23:13:25

sunbeyond 发表于 2015-1-20 09:37
你能具体点？？具体报什么错什么现象

first above all I should say sorry for my input method failure, which made me unable to type Chinese.

If you are waiting for an alarm for CT, I suggest to wait longer. Archlinuxarm just released image for CT (http://archlinuxarm.org/platforms/armv7/allwinner/cubietruck), and I tried just now, strictly following the steps. There should be bugs when I booted. I got output on hdmi when booting, but after booting, the display halted before login. also eth is not ready, and the led for eth doesnot flash even cable was plugged, and no IP assigned to CT. That is, I cannot connect to CT via ssh. So I didnot take a try of wifi and other drivers.

I tried to login headlessly (just plugged in a usb keyboard, and type root/root), and reboot/poweroff. It works. That is, CT does started. I modified script.bin to change the display settings, but got nothing work.

sunbeyond · 发表于 2015-2-5 09:32:01

gcd0318 发表于 2015-2-4 23:13
first above all I should say sorry for my input method failure, which made me unable to type Chine ...

串口有什么打印吗？

gcd0318 · 发表于 2015-2-5 12:06:29

sunbeyond 发表于 2015-2-5 09:32
串口有什么打印吗？

没有尝试，因为我已经装在盒子里跑，懒得拆开了。不过我把卡mount到别的机器上看，驱动应该是够的，script.bin解成fex也没发现错，谁有兴趣可以再自己编译一个script.fex对照一下

		自动登录	找回密码
密码			立即注册